Monday March 14, 2022
Tapped Rollbar Holes, Trimmed Aft Window (Canopy)
1.2 Hours

Previous - Index - Next

Tonight I drilled out these holes in the roll bar to #35 and tapped them for 6-32 per the instructions.

I chucked the tap in my electric drill and rotated it slowly into the holes. Worked well.

Then, I connected the dots on the trim line on the forward edge of the rear window and trimmed that section off. I trimmed a bit long, so the gap with the canopy should be pretty tight. This will give me space to sand and get the gap right where I want it.

Previous - Index - Next

Creative Commons License Unless otherwise stated, all content on this site is licensed under a Creative Commons Attribution-Noncommercial-No Derivative Works 3.0 Unported License.