Thursday February 8, 2024
Landing Gear Fairings (Landing Gear)
1.3 Hours

This layup set up, so I sanded it down. Then I fit the two halves together of this wheel fairing and did a bit more sanding until I was happy with it.

I released the gear leg fairings from the gear legs, sanded the rough areas from the reinforcement layup on the tabs, and then mounted them back on the legs with the worm gear clamps. This looks like it should work fairly well.

Then, I did some more sanding on the other wheel fairing. Slow, iterative work that I don't particularly enjoy.

This work is licensed under Attribution-NonCommercial-NoDerivatives 4.0 International