Saturday September 9, 2023
Right Wing Tip Lens Screws, Tip Filling (Wing Tips)
1.0 Hours

With the little epoxy puddles in place, I drilled and tapped holes for the corner screws for the lens.

The leading edge of the tip doesn't quite match the leading edge of the wing, so I filled that area with some epoxy/micro mixture. This will require a lot of sanding/filling.

I also filled the one area where there's a dip in the top surface of the tip. Again, this tip is in much better shape than the left one was.

I filled various obvious pinholes throughout the surface of the tip, as well.

This work is licensed under Attribution-NonCommercial-NoDerivatives 4.0 International