Saturday May 25, 2024
More Cowl Work, Engine Misc (Firewall Forward)
3.0 Hours

With the inlet ducts epoxied into place, I added some epoxy/micro to smooth the transitions.

I also sanded and fiberglassed the aft edges of the lower cowl to cover the gap I had to the fuselage skins.

I installed the Adel clamps on the breather tube.

I also installed the right size adel clamp on the fuel hose from the mechanical pump to the servo.

I installed the heat muff on the #1 exhaust tube.

I got out the baffles and started to fit them to the engine.

This work is licensed under Attribution-NonCommercial-NoDerivatives 4.0 International